Five Bars 4mm 5052 H112 Aluminium Checkered Sheet For Ship Floor
Production Description
Aluminum Magnesium Alloy pattern plate: to 5052 or 5083 and other
5000 series of aluminum plate as raw material processing, with good
milk corrosion, hardness, rust-proof performance. Usually used in
special places, such as ships, carriage lights wet environment,
such as the high hardness of the aluminum plate, there is a certain
load-bearing capacity. FIVE-BAR ALUMINUM ALLOY PATTERN PLATE:
five-bar anti-skid aluminum plate has good anti-skid ability, and
is widely used in building floor platform design. As the aluminum
surface pattern is arranged in parallel according to five concave
and convex patterns, and each pattern and other patterns between
60-80 degrees angle, so this pattern has excellent anti-skid
performance. The aluminum plate is usually used as anti-skid in
China, and has good anti-skid Effect
5052 aluminum plate is AL-Mg alloy aluminum plate, magnesium is the
main alloy element in 5052 alloy aluminum plate, is the most widely
used one kind of anti-rust aluminum, this alloy has high strength,
especially has the anti-fatigue strength: plasticity and corrosion
resistance, can not be strengthened by heat treatment, in semi-cold
work hardening plastic is good, cold work hardening plastic is low,
corrosion resistance, good weldability, poor cutting performance,
can be polished. Aluminum-magnesium alloys also contain small
amounts of manganese, chromium, beryllium, titanium, etc. . In
addition to a small amount of solid solution, the majority of
manganese in the alloy forms MNAL6. The effect of chromium in 5052
aluminum plate is similar to that of manganese, which can improve
the resistance to stress corrosion cracking, increase the strength
of base metal and weld, and reduce the tendency of weld crack, but
the content of chromium is not more than 0.35% .
| ALLOY | CHEMICAL COMPOSITION (%) |
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Other | Al |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | __ | 0.1 | __ | __ | 0.05 | 0.15 | rest |
| 5A06 | ≤0.40 | 0.000～0.400 | ≤0.10 | 0.50～0.8 | 5.8～6.8 | __ | 0.0001～0.005 | ≤0.20 | 0.02～0.10 | __ | 0.05 | 0.1 | rest |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest |
| 5050 | 0.4 | 0.7 | 0.2 | 0.1 | 1.1-1.8 | 0.1 | __ | 0.25 | __ | __ | 0.05 | 0.15 | rest |
| 5154 | 0.25 | 0.4 | 0.1 | 0.1 | 3.1-3.9 | 0.15-0.35 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | __ | 0.2 | 0.15 | __ | 0.05 | 0.15 | rest |
| 5454 | 0.25 | 0.4 | 0.1 | 0.5-1.0 | 2.4-3.0 | 0.05-0.2 | | 0.25 | 0.2 | | 0.05 | 0.15 | rest |
| 5182 | 0.2 | 0.35 | 0.15 | 0.2-0.5 | 4.0-5.0 | 0.1 | | 0.25 | 0.1 | | 0.05 | 0.15 | rest |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | _ | 0.25 | 0.15 | __ | 0.05 | 0.15 | rest |
| 5086 | 0.4 | 0.5 | 0.1 | 0.2-0.7 | 3.5-4.5 | 0.05-0.25 | | 0.25 | 0.15 | | 0.05 | 0.15 | rest |
Aluminum Checker Sheet Advantages
1. Accurate size, good anti-slip effect,wide range of applications
.
2. Strong plasticity, easy forming and excellent processing
performance.
3. Embossed aluminum sheet can form a dense and strong oxide film
on aluminum surface to prevent the intrusion of oxygen, so it has
good corrosion resistance.
4. Good elongation and tensile strength, fully able to meet the
normal processing requirements (stamping, stretching), high
formability.
5. The surface quality of aluminum checker plate is good, no oil
spots, waves, scratches, roller marks, neat trimming, no burrs.
6.The advantages of tread plate are slip resistant, corrosion
resistant, hygienic, protective and attractive.
7.Tread plate can be found in parking lots, garages, stairways,
step ladders, elevators, loading docks, warehouses, distribution
centers, hospitals, factories, ships, floating docks, refrigerator
trucks, walk-in freezers, elevators, walkways, handicapped access
ramps, truck tool boxes, trailers, and much more.
| Diamond Aluminium Plate |
| Alloy | 1050/1060/1100/3003/5754/5083/6061/6063/6060/6082/8011 |
| Temper | H14,H18,H24,H32 ,H112, H114, T4,T6 ,T651,O |
| Thickness (mm) | 0.4mm to 7 mm |
| Width (mm) | Up to 1800mm |
| Length (mm) | Up to 6000mm |
| Standard | GB/T3880-2012 |
| MOQ | 5ton |
| Application | 1)Decorated inside and outside the car /building frame, windows,
doors, ceiling, decorating panel and curtain wall |
| 2)Household appliances: refrigerators, microwave ovens, audio
equipment, etc. |
Technical Property
| Alloy | Temper | Thickness(mm) | Tensile strength(Mpa) | Yeild strength(Mpa) | Elongation(%) |
| Min |
| 5052 | H111 O | >0. 20 — 0. 50 | 170 — 215 | 65 | 12 |
| >0. 50 — 1. 50 | 14 |
| >1.55 — 3.00 | 16 |
| >3. 00 — 6. 00 | 18 |
| >6.00 — 12. 50 | 165-215 | 19 |
| >12. 50 — 50.00 | — |
| H12 | >0. 20 — 0. 50 | 210 — 260 | 160 | 4 |
| >0.5-1.5 | 5 |
| >1.50 —3.00 | 6 |
| >3, 00 — 6. 00 | 8 |
| H14 | >0. 20 — 0. 50 | 230-280 | 180 | 3 |
| >0.50-1.50 | 3 |
| >1. 50 -3. 00 | 4 |
| >3.00 — 6.00 | 4 |
| H16 | >0. 20 — 0, 50 | 250—300 | 210 | 2 |
| >0. 50 — 1. 50 | 3 |
| >1. 5- 3.0 | 3 |
| >3.00 — 4. 00 | 3 |
| H18 | >0. 20-0.50 | 270 | 240 | 1 |
| >0. 50 — 1. 50 | 2 |
| > 1.50 — 3.00 | 2 |
| H22 H32 | >0. 20—0. 50 | 210 — 260 | 130 | 5 |
| >0. 50-1.50 | 6 |
| >1.50 — 3.00 | 7 |
| >3. 00 — 6. 00 | 10 |
| H24 H34 | >0. 20 — 0. 50 | 230 — 280 | 150 | 4 |
| >0.50 — 1. 50 | 5 |
| >1,50 — 3.00 | 6 |
| >3.00 — 6.00 | 7 |
| H26 H36 | >0. 20 — 0.50 | 250 — 300 | 180 | 3 |
| >0. 50 — 1, 50 | 4 |
| >1.50—3.00 | 5 |
| >3. 00—4. 00 | 6 |
| H38 H28 | >0. 20 — 0, 50 | 270 | 210 | 3 |
| >0. 50~1. 5 | 3 |
| >1. 50 — 3. 00 | 4 |
| H112 | >6.00—12. 50 | 190 | 80 | 7 |
| >12. 50 — 40,00 | 170 | 70 | |
| >40, 00 — 80, 00 | 170 | 70 | |
Photos
Company Introduction
Chongqing Dongchong AluminumCo,.Ltd. is a manufacturer of Aluminium
products with well-equipped,experienced work team.Our company is
equipped with international advanced aluminum production lines. We
also own press machine, double-sided milling, cutting machine,
recoiler, grinding machine, quenching furnace, tension
pre-stretching machine, annealing furnace, smelting furnace machine
and so on. We mainly provide aluminum and its alloy sheets, plates,
strips, circles, foils, embossed coils, colorful painted aluminum
coils, sheet products, etc.With a wide range, good quality,
reasonable prices and stylish designs, our products can meet most
of all customer needs.Our company established in 2002 and have been
in aluminium indurstry for more than 15 years.We have our own brand
and customized services are available too.We are an ISO9001:2008
certified company and our QC staff members have ten years'
experience in this area. To maintain a strict QC system, we not
only utilize precision testing instruments but also continuously
train our QA personnel regarding the latest testing principles.We
have established long term business relationships with customers in
many countries and areas in the world, including the USA, Canada,
Brazil, India, Chile, Nigeria, Ghana, Italy, etc. We will continue
providing high quality products and better services for our
customers, and welcome you to visit our company and establish good
business relationships with us.
| Equipment Production Parameters By Chongqing Dongchong Aluminum
Co.,Ltd |
| 1650mm Slitting machine | Uncoil(MM) | Finished size(MM) | Slitting Width(MM) |
| ID | OD | Width | Thickness | ID | OD | Above 0.5mm≥ 20mm |
| Φ 400 | ≤ 1800 | ≤ 1600 | 0.5-4.5 | Φ 400 | ≤ 1700(normal) |
| Φ 500 | Φ500(normal) |
| Φ 600 |
| 650mm Slitting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 400 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150
Φ300
Φ400 Φ500 | ≤ 1700(normal) | 6-600 |
| Φ 500 |
| Aluminum foil Slitting machine | Uncoil(mm) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 76 | ≤ 550 | ≤ 1200 | 0.08-0.12 | Φ76Φ76 | ≤ 550(normal) | |
| 1450mm Crosscutting machine | Uncoil(MM) | Finished size(MM) |
| ID | OD | Width | Thickness | ID | OD | Width |
| Φ 505 | ≤ 1780 | ≤ 600 | 0.1-1.5 | Φ150
Φ300
Φ400 Φ500 | ≤ 1700(normal) | 6-600 |
